JKCI - Journal of the Korea Concrete Institute

1

ACI Committee 211 , 1991, Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete (ACI 211.1-91), Farmington Hills, MI; American Concrete Institute (ACI)

2

ASTM C109 , 2016, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50- mm] Cube Specimens), West Conshohocken, PA; ASTM International.

3

ASTM C127-15 , 2015, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, West Conshohocken, PA; ASTM International.

4

ASTM C136/C136M-19 , 2019, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, West Conshohocken, PA; ASTM International.

5

ASTM C143/C143M-20 , 2020, Standard Test Method for Slump of Hydraulic-Cement Concrete, West Conshohocken, PA; ASTM International.

6

ASTM C150/C150M-20 , 2020, Standard Specification for Portland Cement, West Conshohocken, PA; ASTM International.

7

ASTM C289-07 , 2007, Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method) (Withdrawn 2016), West Conshohocken, PA; ASTM International.

8

ASTM C33/C33M-18 , 2018, Standard Specification for Concrete Aggregates, West Conshohocken, PA; ASTM International.

9

ASTM C39/C39M-20 , 2020, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, West Conshohocken, PA; ASTM International.

10

Binici H., 2007, Effect of Crushed Ceramic and Basaltic Pumice as Fine Aggregates on Concrete Mortars Properties, Construction and Building Materials, Vol. 21, No. 6, pp. 1191-1197

11

Bolouri Bazaz J., Khayati M., 2012, Properties and Performance of Concrete Made with Recycled Low-quality Crushed Brick, Journal of Materials in Civil Engineering, Vol. 24, No. 4, pp. 330-338

12

Butler L., West J. S., Tighe S. L., 2013, Effect of Recycled Concrete Coarse Aggregate from Multiple Sources on the Hardened Properties of Concrete with Equivalent Compressive Strength, Construction and Building Materials, Vol. 47, pp. 1292-1301

13

Cachim P. B., 2009, Mechanical Properties of Brick Aggregate Concrete, Construction and Building Materials, Vol. 23, No. 3, pp. 1292-1297

14

de Brito J., Pereira A. S., Correia J. R., 2005, Mechanical Behaviour of Non-structural Concrete Made with Recycled Ceramic Aggregates, Cement and Concrete Composites, Vol. 27, No. 4, pp. 429-433

15

Debieb F., Kenai S., 2008, The Use of Coarse and Fine Crushed Bricks as Aggregate in Concrete, Construction and Building Materials, Vol. 22, No. 5, pp. 886-893

16

Fernandez R., Martirena F., Scrivener K. L., 2011, The Origin of the Pozzolanic Activity of Calcined Clay Minerals: A Comparison between Kaolinite, Illite and Montmorillonite, Cement and Concrete Research, Vol. 41, No. 1, pp. 113-122

17

Gruyaert E., Maes M., De Belie N., 2013, Performance of BFS Concrete: K-Value Concept Versus Equivalent Performance Concept, Construction and Building Materials, Vol. 47, pp. 441-455

18

Kahraman S., Fener M., 2007, Predicting the Los Angeles Abrasion Loss of Rock Aggregates from the Uniaxial Compressive Strength, Materials Letters, Vol. 61, No. 26, pp. 4861-4865

19

Kim H. K., 2015, Properties of Normal-strength Mortar Containing Coarsely-crushed Bottom Ash considering Standard Particle Size Distribution of Fine Aggregate, Journal of the Korea Concrete Institute, Vol. 27, No. 5, pp. 531-539. (In Korean)

20

Kim H. K., Lee H. K., 2018, Hydration Kinetics of High- strength Concrete with Untreated Coal Bottom Ash for Internal Curing, Cement and Concrete Composites, Vol. 91, pp. 67-75

21

Kim J. S., Shin Y. S., Cho C. H., No S. Y., 2008, Effect of the Broken Red Bricks on the Mechanical Properties of Reinforced Concrete Beams, Journal of Korea Institute for Structural Maintenance and Inspection, Vol. 12, No. 2, pp. 83-90. (In Korean)

22

Madrid M., Orbe A., Rojí E., Cuadrado J., 2017, The Effects of By-products Incorporated in Low-strength Concrete for Concrete Masonry Units, Construction and Building Materials, Vol. 153, pp. 117-128

23

Mansur M. A., Wee T. H., Lee S. C., 1999, Crushed Bricks as Coarse Aggregate for Concrete, ACI Materials Journal, Vol. 96, No. 4, pp. 478-484

24

Mefteh H., Kebaïli O., Oucief H., Berredjem L., Arabi N., 2013, Influence of Moisture Conditioning of Recycled Aggregates on the Properties of Fresh and Hardened Concrete, Journal of Cleaner Production, Vol. 54, pp. 282-288

25

Mohammed T. U., Hasnat A., Awal M. A., Bosunia S. Z., 2015, Recycling of Brick Aggregate Concrete as Coarse Aggregate, Journal of Materials in Civil Engineering, Vol. 27, No. 7, B4014005

26

Narasimhan H., Chew M. Y. L., 2009, Integration of Durability with Structural Design: An Optimal Life Cycle Cost Based Design Procedure for Reinforced Concrete Structures, Construction and Building Materials, Vol. 23, No. 2, pp. 918-929

27

Poon C. S., Shui Z. H., Lam L., Fok H., Kou S. C., 2004, Influence of Moisture States of Natural and Recycled Aggregates on the Slump and Compressive Strength of Concrete, Cement and Concrete Research, Vol. 34, No. 1, pp. 31-36

28

Yoon H. S., Yang K. H., 2015, Determination of Water- to-binder Ratios on the Equivalent Compressive Strength of Concrete with Supplementary Cementitious Materials, Journal of the Korea Concrete Institute, Vol. 27, No. 6, pp. 687-693. (In Korean)

29

Choi B. S., Yoon H. S., Moon H. K., Yang K. H., 2018, Environmental Impact Assessment of Lightweight Aggregate Concrete according to Replacement Ratio of Artificial Lightweight Fine Aggregates, Journal of the Korea Concrete Institute, Vol. 30, No. 3, pp. 297-304. (In Korean)

30

Song G. I., Lee K. H., Yang K. H., Song J. K., 2018, Creep Characteristics of Artificial Lightweight Aggregate Concrete and Prediction Model, Journal of the Korea Concrete Institute, Vol. 30, No. 5, pp. 517-524. (In Korean)

JKCIJournal of
the Korea Concrete Institute

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.

Journal Search

Journal XML

References

JKCIJournal ofthe Korea Concrete Institute