Mobile QR Code QR CODE
Export citation EndNote
1 
1.Korea Meteorological Administration (KMA), “http://www.kma.go.kr/weather/earthquake/report.jsp”, 2014.Google Search
2 
2.FEMA547, Techniques for the Seismic Rehabilitation of Existing Buildings, 2006.Google Search
3 
3.Architectural Institute of Korea, Korean Building Code and Commentary, 2009.Google Search
4 
4.Korea Infrastructure Safety & Technology Corporation, Seismic Performance Evaluation and Improvement of Existing Buildings, 2011.Google Search
5 
5.Cheng, H. K., and MacAlevey, N., “Experimental Behavior of Jacketed Reinforced Concrete Beams,” Journal of Structural Engineering, ASCE, Vol. 126, No. 6, 2000, pp. 692-699.DOI
6 
6.Martinola, G., Meda, A., Plizzari, G. A., and Rinaldi, Z., “Strengthening and Repair of RC Beams with Fiber Reinforced Concrete,” Cement & Concrete Composites, Vol. 32, No. 9, 2010, pp. 731-739.DOI
7 
7.Meda, A., Mostosi, S., and Riva, P., “Shear Strengthening of Reinforced Concrete Beam with High-Performance Fiber-Rein-forced Cementitious Composite Jacketing,” ACI Structural Journal, Vol. 111, No. 5, 2014, pp. 1059-1067.DOI
8 
8.Choi, J. T., Strengthening of RC Beams with Ultra High Performance Concrete, Master’s Thesis, Seoul National University, Seoul, Korea, 2016, p. 123Google Search
9 
9.Choi, J. T., Lim, W. Y., and Hong, S. G., “Strengthening T-shaped RC beams with UHPC,” 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials (HiPerMat 2016), Kassel, Germany, 2016.Google Search
10 
10.ACI Committee, Concrete Repair Manual, ACI, Farmington Hills, 1996, pp. 287-327.Google Search
11 
11.Tayeh, B. A., Abu Bakar, B. H., and Megat Johari, M. A., “Characterization of the Interfacial Bond between Old Concrete Substrate and Ultra High Performance Fiber Concrete Repair Composite,” Materials and Structures, Vol. 46, No. 5, 2013, pp. 743-753.DOI
12 
12.Harris, D. K., Sarkar, J., and Ahlborn, T, M., “Characterization of Interface Bond of Ultra-High-Performance Concrete Bridge Deck Overlays,” Journal of the Transportation Research Board, No. 2240, 2011, pp. 40-49.DOI
13 
13.ASTM C882, Standard Test Method for Bond Strength of Epoxy-Resin Systems used with Concrete by Slant Shear, ASTM, West Conshohocken, 1999.Google Search
14 
14.ACI Committee 318, Building Code Requirements for Structural concrete(ACI 318M-14) and Commentary, ACI 318-14, 2015. p. 519Google Search
15 
15.Korea Concrete Institute, Concrete Design Code and Commen-tary, Kimoondang Publishing Company, Seoul, Korea, 2012, p. 599Google Search
16 
16.Lim, W. Y., and Hong, S. G., “Compressive Behavior of Hybrid Steel Fiber Reinforced Ultra-High Performance Concrete,” Journal of the Korea Concrete Institute, Vol. 28, No. 2, 2016, pp. 213-221.DOI
17 
17.Korea Concrete Institute, Design Recommendations for Ultra-High Performance Concrete K-UHPC, KCI-M-12-003, 2012 (in Korean).Google Search
18 
18.fib, 2010. Model Code 2010 Final draft – Volumes 1 and 2, fib Bulletin 55 and 56, Fédération Internationale du béton (fib), Lausanne, Switzerland, 2012.Google Search