Banfill, P. F. G. (1991) The Rheology of Fresh Mortar. Magazine of Concrete Research 43(154), 13-21.

Bi, M., Xia, L., Tran, P., Li, Z., Wan, Q., Wang, L., Shen, W., Ma, G., and Xie, Y. M. (2022) Continuous Contour-Zigzag Hybrid Toolpath for Large Format Additive Manufacturing. Additive Manufacturing 55.

Bos, F. P., Wolfs, R. J. M., Ahmed, Z. Y., and Salet, T. A. M. (2016) Additive Manufacturing of Concrete in Construction: Potentials and Challenges of 3D Concrete Printing. Virtual and Physical Prototyping 11(3), 209-225.

Comminal, R., Leal da Silva, W. R., Andersen, T. J., Stang, H., and Spangenberg, J. (2020) Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics. Cement and Concrete Research 138.

Khan, S. A., and Koç, M. (2022) Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing: The Underlying Physics, Potential, and Challenges. Results in Materials 16.

Mechtcherine, V., Bos, F. P., Perrot, A., Leal da Silva, W. R., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., and Roussel, N. (2020) Extrusion-Based Additive Manufacturing with Cement-Based Materials–Production Steps, Processes, and Their Underlying Physics: A Review. Cement and Concrete Research 132.

Mollah, M. T., Comminal, R., Serdeczny, M. P., Šeta, B., and Spangenberg, J. (2023) Computational Analysis of Yield Stress Buildup and Stability of Deposited Layers in Material Extrusion Additive Manufacturing. Additive Manufacturing 71.

Nguyen-Van, V., Li, S., Liu, J., Nguyen, K., and Tran, P. (2023) Modelling of 3D Concrete Printing Process: A Perspective on Material and Structural Simulations. Additive Manufacturing 61.

Park, J. (2026) Development of Experimental-Numerical Model for Evaluating Early-Age Buildability of 3D Concrete Printing Mortar. Master’s Thesis, University of Seoul (In Korean)

Perrot, A., Pierre, A., Nerella, V. N., Wolfs, R. J. M., Keita, E., Nair, S. A. O., Neithalath, N., Roussel, N., and Mechtcherine, V. (2021) From Analytical Methods to Numerical Simulations: A Process Engineering Toolbox for 3D Concrete Printing. Cement and Concrete Composites 122.

Ranjbar, N., Mehrali, M., Kuenzel, C., Gundlach, C., Pedersen, D. B., Dolatshahi-Pirouz, A., and Spangenberg, J. (2021) Rheological Characterization of 3D Printable Geopolymers. Cement and Concrete Research 147.

Roussel, N. (2018) Rheological Requirements for Printable Concretes. Cement and Concrete Research 112, 76-85.

Wang, D., Zhang, Y., Xiao, J., Shi, J., Chen, Y., Pang, B., Wu, M., Liu, G., and Yang, Y. (2021) Study on Dynamic and Static Structural Build-Up of Fresh Cement Paste with Limestone Powder Based on Structural Kinetics Model. Construction and Building Materials 305.

Wolfs, R. J. M., Bos, F. P., and Salet, T. A. M. (2018) Early Age Mechanical Behaviour of 3D Printed Concrete: Numerical Modelling and Experimental Testing. Cement and Concrete Research 106, 103-116.

Yoo, B.-H., Lee, D.-G., Park, J.-P., and Hwang, B.-I. (2021) Fundamental Properties of 3D Printing Mortar According to Temperature Conditions. Journal of Korea Academia-Industrial Cooperation Society 22(9), 448-454. (In Korean)