Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.
  • SCOPUS
  • KCI Accredited Journal

Journal Search

  1. Home
  2. All Issues
  3. 2023-12 (Vol.35 No.6)
  4. 10.4334/JKCI.2023.35.6.611
Export citation EndNote
XML PDF INFO REF

References

1 
ACI Committee 318 (2019) Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318 R-19). Farmington Hills, MI: American Concrete Institute (ACI).URL
2 
Badawy, H. E. I., McMullen, A. E., and Jordann, I. J. (1977) Experimental Investigation of the Collapse of Reinforced Concrete Curved Beams. Magazine of Concrete Research 29(99), 59-69.DOI
3 
Belarbi, A., Prakash, S., and You, Y. M. (2009) Effect of Spiral Reinforcement on Flexural-Shear-Torsional Seismic Behavior of Reinforced Concrete Circular Bridge Columns. Structural Engineering and Mechanics 33(2) 137-158.URL
4 
Bentz, E. C., and Collins, M. P. (2006) Development of the 2004 Canadian Standard Association (CSA) A23.3 Shear Provisions for Reinforced Concrete. Canadian Journal of Civil Engineering 33(5), 521-534.DOI
5 
Bernardo, L. F. A., and Andrade, J. M. A. (2020) A Unified Softened Truss Model for RC and PC Beams Under Torsion. Journal of Building Engineering 32(1), 101467.DOI
6 
Bernardo, L. F. A., and Lopes, S. M. R. (2009) Torsion in High- strength Concrete Hollow Beams: Strength and Ductility Analysis. ACI Structural Journal 106(1), 39-48.URL
7 
CEN (2004) Eurocode 2: Design of Concrete Structures - Part 1-1: GeneraL Rules and Rules for Buildingsn (BS EN 1992- 1-1:2004). London, UK: European Committee for Standardization (CEN), British Standards Institute (BSI).URL
8 
Collins, M. P., Mitchell, D., Adebar, P. E., and Vecchio, F. J. (1996) A General Shear Design Method. ACI Structural Journal 93(1), 36-45.URL
9 
Collins, M. P., Walsh, P. F., Archer, F. E., and Hail, A. S. (1968) Ultimate Strength of Reinforced Concrete Beams Subjected to Combined Torsion and Bending. Torsion of Structural Concrete SP-18. American Concrete Institute, Detroit. 279- 402.URL
10 
CSA Committee A23.3-19 (2019) Design of Concrete Structures (CAN/CSA-A23.3-19). Canadian Standards Association (CS A), Canada. 295.URL
11 
Elfgren, L., Karlsson, I., and Losberg, A. (1974) Torsion-Bending-Shear Interaction for Concrete Beams. Journal of Structural Division 100(ST8), 1657-1676.DOI
12 
Ewida, A. A., and McMullen, A. E. (1981) Torsion-Shear-Flexure Interaction in Reinforced Concrete Members. Magazine of Concrete Research 33(115), 113-122.DOI
13 
Gesund, H., Schuette, F. J., Buchanan, G. R., and Gray, G. A. (1964) Ultimate Strength in Combined Bending and Torsion of Concrete Beams Containing both Longitudinal and Transverse Reinforcement. Journal of the American Concrete Institute Proceedings 51(12), 1509-1522.DOI
14 
Greene, G. G. (2006) Behavior of Reinforced Concrete Girders under Cyclic Torsion and Torsion Combined with Shear: Experimental Investigation and Analytical Models. Ph.D. Thesis, Department of Civil, Architectural, and Environmental Engineering, Missouri University of Science and Technology, Rolla, MO,URL
15 
Hsu, T. T. C. (1968) Behavior of Reinforced Concrete Rectangular Members. ACI Structural Journal 18(1), 261-306.URL
16 
Hsu, T. T. C. (1984) Torsion of Reinforced Concrete. Van Nostrand Reinhold, Inc., New York.URL
17 
Hsu, T. T. C., and Mo, Y. L. (2010) Unified Theory of Concrete Structures. Wiley and Sons. 500.URL
18 
Huang, L., Lu, Y., and Shi, C. (2013) Unified Calculation Method for Symmetrically Reinforced Concrete Section Subjected to Combined Loading. ACI Structural Journal 110(1), 127-136.URL
19 
Jeng, C. H., and Hsu, T. T. C. (2009) A Softened Membrance Model for Torsion in Reinforced Concrete Members. Engineering Structures 32(9), 1944-1954.DOI
20 
Joint ACI-ASCE Committee 445 (2013) Report on Torsion in Structural Concrete. 445.1R-12, Farmington Hills, MI.URL
21 
Ju, H, Han, S. J., Kim, K. S., Strauss, A., and Wu, W. (2020a) Multi-potential Capacity for Reinforced Concrete Members under Pure Torsion. Structural Engineering and Mechanics 75(3), 401-414.URL
22 
Ju, H., and Lee, D. (2021) Nonlinear Analysis of Reinforced Concrete Members Subjected to Combined Torsion and Bending Moment. ACI Structural Journal 118(4), 55-70.URL
23 
Ju, H., Han, S. J., and Kim, K. S. (2020b) Analytical Model for Torsional Behavior of RC Members Combined with Bending, Shear, and Axial Loads. Journal of Building Engineering 32(1), 101730.DOI
24 
Ju, H., Lee, D. H., Hwang, J. H., Kim, K. S., and Oh, Y. H. (2013) Fixed-angle Smeared-truss Approach with Direct Tension Force Transfer Model for Torsional Behavior of Steel Fiber-reinforced Concrete Members. Journal of Advanced Concrete Technology 11(9), 215-229.DOI
25 
Ju, H., Lee, D., Kim, K. H., Yerzhanov, M., Zhang, D., and Kim, J. R. (2021a) Torsional Design Method Used in Eurasia Region: A Comparative Study. Structural Concrete 22(6), 3798-3834.DOI
26 
Ju, H., Lee, D., Yerzhanov, M., Kim, K. H., and Lee, C. J. (2021b) Torsional Design Method Based on Skew Bending Theory in Eurasia. Journal of the Korea Concrete Institute 33(2), 203-213.DOI
27 
Ju, H., Lee, D., Zhang, W., and Wang, L. (2022) Torsional Strength Model of Reinforced Concrete Members Subjected to Combined Loads. Computers and Concrete 29(5), 285- 301.DOI
28 
KCI (2021) Concrete Design Code and Commentary. Seoul, Korea: Korea Concrete Institute (KCI). (In Korean)URL
29 
Klus, J. P. (1968) Ultimate Strength of Reinforced Concrete Beams in Combined Torsion and Shear. ACI Journal 65(3), 210-216.DOI
30 
Lampert, P., and Thurlimann, B. (1971) Ultimate Strength and Design of Reinforced Concrete Beams in Torsion and Bending. International Association of Bridge and Structural Engineering 31(I), 107-131.URL
31 
Lessig, N. N. (1959) Determination of Load-carrying Capacity of Rectangular Reinforced Concrete Elements Subjected to Flexure and Torsion. Concrete and Reinforced Concrete Institute Trudy No. 5, Moscow. 5-28. (In Russian)URL
32 
MacGregor, J. G., and Wight, J. K. (2006) Reinforced Concrete Mechanics and Design. Fourth Edition, in SI Units, Prentice-Hall, Inc., 1111 pp.URL
33 
McMullen, A. E., and El-Degwy, W. M. (1985) Prestressed Concrete Tests Compared with Torsion Theories. PCI Journal 30(5), 55-75.URL
34 
McMullen, A. E., and Warwaruk, J. (1967) The Torsional Strength of Rectangular Reinforced Concrete Beams Subjected to Combined Loading. Research Report, University of Alberta, Edmonton, AB, Canada. 162.URL
35 
McMullen, A. E., and Warwaruk, J. M. (1970) Concrete Beams in Bending, Torsion and Shear. Journal of Structural Engineering, ASCE 96(ST5), 885-903.DOI
36 
Mitchell, D., and Collins, M. P. (1974) Diagonal Compression Field Theory-A Rational Model for Structural Concrete in Pure Torsion. ACI Journal 71(8), 396-408.DOI
37 
Nagataki, S., Okomoto, T., and Lee, S. H. (1988) A Study on Mechanism of Torsional Resistance of Reinforced Concrete Members. JSCE Transactions No. 190 Y-8, 75-91.DOI
38 
Onsongo, W. M. (1978) The Diagonal Compression Field Theory for Reinforced Concrete Beams Subjected to Combined Torsion, Flexure and Axial Loads. Ph.D. Dissertation, Department of Civil Engineering, University of Toronto, Canada. 246.URL
39 
Osburn, D. L., Mayoglou, B., and Mattock, A. H. (1969) Strength of Reinforced Concrete Beams with Web Reinforcement in Combined Torsion, Shear, and Bending. ACI Journal 66(1), 31-41.DOI
40 
Pandit, G. S., and Warwaruk, J. (1968) Reinforced Concrete Beams in Combined Bending and Torsion. ACI Journal SP-18, 133-163.DOI
41 
Pitchard, R. G. (1970) Torsion-Shear Interaction of Reinforced Concrete Beams. Thesis Submitted to the University of Calgary for the Degree of MSc, Department of Civil Engineering. 146 pp.URL
42 
Prakash, S., Belarbi, A., and You, Y. M. (2010) Seismic Performance of Circular RC Columns Subjected to Axial Force, Bending, and Torsion with Low and Moderate Shear. Engineering Structures 32(1), 46-59.DOI
43 
Prakash, S., Li, Q., and Belarbi, A. (2012) Behavior of Circular and Square Reinforced Concrete Bridge Columns under Combined Loading Including Torsion. ACI Structural Journal 109(3), 317-327.URL
44 
Rahal, K. N. (1993) Behavior of Reinforced Concrete Beams Subjected to Combined Shear and Torsion. Ph.D. Thesis, University of Toronto. 175.URL
45 
Rahal, K. N. (2006) Evaluation of AASHTO-LRFD General Procedure for Torsion and Combined Loading. ACI Structural Journal 103(5), 683-692.URL
46 
Rahal, K. N. (2007) Combined Torsion and Bending in Reinforced and Prestressed Concrete Beams Using Simplified Method for Combined Stress-Resultants. ACI Structural Journal 104(4), 402-411.URL
47 
Rahal, K. N. (2021) A Unified Approach to Shear and Torsion in Reinforced Concrete. Computers and Concrete 77(5), 691- 703.URL
48 
Rahal, K. N., and Collins, M. P. (1995) Effect of Thickness of Concrete Cover on Shear-Torsion Interaction-An Experimental Investigation. ACI Structural Journal 92(3), 334-342.URL
49 
Rahal, K. N., and Collins, M. P. (2003) Experimental Evaluation of ACI and AASHTO-LRFD Design Provisions for Combined Shear and Torsion. ACI Structural Journal 100(3), 277-282.URL
50 
Vecchio, F. J., and Collins, M. P. (1986) The Modified Compression Field Theory for Reinforced Concrete Elements Subjected to Shear. American Concrete Institute Journal 83(2), 219-231.URL
51 
You, Y. M., and Belarbi, A. (2011) Thickness of Shear Flow Zone in a Circular RC Column under Pure Torsion. Engineering Structures 33(9), 2435-2447.DOI