JKCI - Journal of the Korea Concrete Institute

1

ACI Committee 523 , 2009, Guide for Design and Construction with Autoclaved Aerated Concrete Panels (ACI 523 4R), Farmington Hills MI American Concrete Institute (ACI), pp. 1-60

2

ASTM C1329 , 2016, Standard Specification for Mortar Cement, West Conshohocken PA ASTM International

3

ASTM C270-14 , 2014, Standard Specification for Mortar for Unit Masonry, West Conshohocken PA ASTM International

4

ASTM D4595 , 2017, Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method, West Conshohocken PA ASTM International

5

Babaeidarabad S., Caso F. D., Nanni A., 2014, URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite Subjected to Diagonal Compression, Journal of Composites for Construction, Vol. 18, No. 2, pp. 04013045-1-9

6

Borri A., Castori G., Corradi M., Sisti R., 2014, Masonry Wall Panels with GFRP and Steel-Cord Strengthening Subjected to Cyclic Shear: An Experimental Study, Construction and Building Materials, Vol. 56, pp. 63-73

7

CEN , 2000, Methods of Test for Masonry - Part 4: Determination of Shear Strength Including Damp Proof Course (EN 1052-4, London UK European Committee for Standardization (CEN)British Standards Institute (BSI)

8

Gattesco N., Boem I., 2015, Experimental and Analytical Study to Evaluate the Effectiveness of an In-Plane Reinforcement for Masonry Walls Using GFRP Meshes, Construction and Building Materials, Vol. 88, pp. 94-104

9

Kim C., Park H., Kim Y., 2020a, Mechancal Properties of Autoclaved Lightweight Concrete Block, Journal of the Korea Concrete Institute, Vol. 32, No. 2, pp. 145-153

10

Kim C., Park H., Kim Y., 2020b, Flexural Tensile Strength of ALC Blocks Strengthend with Glass Fiber Mesh, Journal of the Korea Concrete Institute, Vol. 32, No. 3, pp. 213-223

11

Kim Y., 2019, Structural Performance of Autoclaved Lightweight Concrete Masonry Walls Subjected to Cyclic Lateral Loading, Master’s Thesis Seoul National University

12

MOLIT , 1997, Structural Design Guideline for Autoclaved Lightweight Concrete Block, Sejong Korea Ministry of Land Infrastructure and Transport (MOLIT)

13

MSJC , 2013, Building Code Requirements and Specification for Masonry Structures (TMS 402-13/ACI 530-13/ASCE 5-13), Masonry Standards Joint Committee (MSJC)

14

Papanicolaou C. G., Triantafillou T. C., Karlos K., Papathanasiou M., 2007, Textile-Reinforced Mortar (TRM) Versus FRP as Strengthening Material of URM Walls: In- Plane Cyclic Loading., Materials and Structures, Vol. 40, pp. 1081-1097

15

Papanicolaou C., Triantafillou T., Lekka M., 2011, Externally Bonded Grids as Strengthening and Seismic Retrofitting Materials of Masonry Panels, Construction and Building Materials, Vol. 25, pp. 504-514

16

Prota A., Marcari G., Fabbrocino G., Manfredi G., Aldea C., 2006, Experimental In-Plane Behavior of Tuff Masonry Strengthened with Cementitious Matrix-Grid Composites, Journal of Composites for Construction, Vol. 10, No. 3, pp. 223-233

17

RILEM , 1992, Autoclaved Aerated Concrete - Properties Testing and Design, London New York E & FN Spon RILEM Technical Committees 78-MCA and 51-ALC

18

Shabdin M., Zargaran M., Attari N. K., 2018, Experimental Diagonal Tension (Shear) Test of Un-Reinforced Masonry (URM) Walls Strengthened with Textile Reinforced Mortar (TRM), Construction and Building Materials, Vol. 164, pp. 704-715

19

Tanner J. E., 2003, Design Provisions for Autoclaved Aerated Concrete (AAC) Structural Systems, PhD Dissertation University of Texas at Austin

20

Wight J. K., MacGregor J. G., 2012, Reinforced Concrete: Mechanics and Design, New Jersey Pearson Education Inc, pp. 858-868

JKCIJournal of
the Korea Concrete Institute

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.

Journal Search

Journal XML

References

JKCIJournal ofthe Korea Concrete Institute