JKCI - Journal of the Korea Concrete Institute

1

ACI-ASCE Committee 445 , 2002, Examples for the Design of Structural Concrete with Strut-and-Tie Models, SP-208. American Concrete Institute, Farmington Hills, Michigan, USA

2

ACI-ASCE Committee 445 , 2010, Further Examples for the Design of Structural Concrete with Strut-and-Tie Models, SP-273. American Concrete Institute, Farmington Hills, Michigan, USA

3

Alshegeir A., 1992, Analysis and Design of Disturbed Regions with Strut-Tie Models, Ph.D Dissertation, School of Civil Engineering, Purdue University, Indiana, USA

4

American Association of State Highway and Transportation Officials , 2018, AASHTO LRFD Bridge Design Specifications, 8th Edition, Washington D.C., USA

5

American Concrete Institute , 2014, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, Farmington Hills, Michigan, USA

6

Bergmeister K., Breen J. E., Jirsa J. O., 1991, Dimensioning of the Nodes and Development of Reinforcement, IABSE Colloquium, Report, International Association for Bridge and Structural Engineering, Zurich, Switzerland

7

Bergmeister K., Breen J. E., Jirsa J. O., Kreger M. E., 1993, Detailing in Structural Concrete, Research Report 1127-3F, Center for Transportation Research, University of Texas at Austin, Texas, USA

8

Canadian Standards Association , 2014, Design of Concrete Structures, A23.3-14, 6th Edition, Rexdale, Ontario, Canada

9

Chae H. S., Kim B. H., Yun Y. M., 2011, Indeterminate Strut-Tie Model and Load Distribution Ratio of Continuous RC Deep Beams – (II) Validity Evaluation, Journal of Korean Concrete Institute KCI, Vol. 23, pp. 13-22

10

Clarke J. L., 1973, Behavior and Design of Pile Caps with Four Piles, Report No. 42.489, Cement and Concrete Association, London, UK

11

Comite Euro-International du Beton , 2010, CEP-FIP Model Code 2010, International Federation for Structural Concrete (fib), Lausanne, Switzerland

12

European Committee for Standardization , 2004, Eurocode 2: Design of Concrete Structures, Brussels, Belgium

13

Ha T. H., Hong S. G., 2005, Effect of Diagonal Cracking on the Strength of Concrete Strut in RC Members, KCI Spring Conference, pp. 383-386

14

Kim B. H., Chae H. S., Yun Y. M., 2011, Indeterminate Strut-Tie Model and Load Distribution Ratio of Continuous RC Deep Beams – (I) Proposal of Model & Load Distribution Ratio, Journal of Korean Concrete Institute KCI, Vol. 23, pp. 3-12

15

Kim B. H., Chae H. S., Yun Y. M., 2013, Refined 3-Dimensional Strut-Tie Models for Analysis and Design of Reinforced Concrete Pile Caps, Journal of the Korean Society of Civil Engineers, Vol. 33, No. 1, pp. 1-16

16

MacGregor J. G., 1988, Reinforced Concrete - Mechanics and Design, Prentice Hall, Englewood Cliffs, New Jersey, USA

17

MacGregor J. G., 1997, Reinforced Concrete - Mechanics and Design, 4th Edition, Prentice Hall, Englewood Cliffs, New Jersey, USA

18

Marti P., 1985, Basic Tools of Reinforced Concrete Beam Design, Journal of American Concrete Institute, Vol. 82, No. 1, pp. 46-56

19

Nielsen M. P., Braestrup M. W., Jensen B. C., Bach F., 1978, Concrete Plasticity, Beam Shear - Shear in Joints - Punching Shear, Special Publication, Danish Society for Structural Science and Engineering, Lyngby, Denmark

20

Portland Cement Association , 2004, AASHTO LRFD Strut-Tie Model Design Examples, Skokie, Illinois, USA

21

Ramirez J. A., Breen J. E., 1983, Proposed Design Procedure for Shear and Torsion in Reinforced and Prestressed Concrete, Research Report 248-4F, Center for Transportation Research, University of Texas at Austin, Texas, USA

22

Sabnis G. M., Gogate A. B., 1984, Investigation of Thick Slab (Pile Cap) Behavior, Proc., ACI Journal, Farmington Hills, Michigan, Vol. 81, pp. 35-39

23

Schlaich J., Schaefer K., Jennewein M., 1987, Towards a Consistent Design of Structural Concrete, Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, pp. 74-151

24

Suzuki K., Otsuki K., 2002, Experimental Study on Corner Shear Failure of Pile Caps, Transactions of the Japan Concrete Institute, Vol. 23, pp. 303-310

25

Suzuki K., Otsuki K., Tsubata T., 1998, Influence of Bar Arrangement on Ultimate Strength of Four-Pile Caps, Transactions of the Japan Concrete Institute, Vol. 20, pp. 195-202

26

Suzuki K., Otsuki K., Tsubata T., 1999, Experimental Study on Four-pile Caps with Taper, Transactions of the Japan Concrete Institute, Vol. 21, pp. 361-368

27

Suzuki K., Otsuki K., Tsuchiya T., 2000, Influence of Edge Distance on Failure Mechanism of Pile Caps, Transactions of the Japan Concrete Institute, Vol. 22, pp. 361-368

28

Thurlimann B., 1976, Shear Strength of Reinforced and Prestressed Concrete - CEB Approach, Special Publication 59-6, American Concrete Institute, Detroit, USA

29

Vecchio F. J., Collins M. P., 1982, The Response of Reinforced Concrete to In-plane Shear and Normal Stresses, Publication No. 82-03, Department of Civil Engineering, University of Toronto, Canada

30

Willam K. J., Warnke E. P., 1975, Constitutive Model for the Triaxial Behavior of Concrete, IABSE Proceedings, Vol. 19, pp. 1-30

31

Yun Y. M., Ramirez J. A., 2016, Strength of Concrete Struts in Three-dimensional Strut-Tie Models, Journal of Structural Engineering, ASCE, Vol. 142, No. 11

JKCIJournal of
the Korea Concrete Institute

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.

Journal Search

Journal XML

References

JKCIJournal ofthe Korea Concrete Institute