Mobile QR Code QR CODE

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.
  • SCOPUS
  • KCI Accredited Journal

Journal Search

  1. Home
  2. All Issues
  3. 2016-08 (Vol.28 No.4)
  4. 10.4334/JKCI.2016.28.4.427
Export citation EndNote
XML PDF INFO REF
1 
1.ACI Committee 211. Standard Practice for Selecting Proportions for Structural Lightweight Concrete (ACI 211.2-98), American Concrete Institute, 1998, p.20.Google Search
2 
2.Zhang, M. H., and Gjørv, O. E., “Mechanical Properties of High-Strength Lightweight Concrete,” ACI Materials Journal, Vol.88, No.3, 1991, pp.240-247.Google Search
3 
3.Shin, S. W., and Choi, M. S., “Applications and Prospection of Structural Lightweight Concrete,” Journal of the Korea Concrete Institute, Vol.10, No.4, 1998, pp.16-26.Google Search
4 
4.Yang, K. H., Oh, S. J., and Song, J. K., “Mechanical Properties of Alkali-Activated Slag-Based Concrete Using Lightweight Aggregates,” Journal of the Korea Concrete Institute, Vol.20, No.3, 2008, pp.405-412.DOI
5 
5.Sim, J. I., “The Influence of Unit Weight of Concrete on Size Effect of Compressive Strength, Direct Tensile Strength and Fracture Energy,” PhD Dissertation, Kyonggi University 2013, p.203.Google Search
6 
6.Kim, J. H., Kim, S. H., Sa, S. H., Ji, S. W., Choi, S. K., and Seo, C. H., “An Experimental Study on the Physical Properties of Lightweight Concrete according to Aggregate Union,” Proceeding of Korea Concrete Institute, Vol.22, No.1, 2010, pp.225-226.Google Search
7 
7.Seo, E. A., and Yang, K. H., “Life Cycle CO2 Assessment of Light Weight Concrete according to the Replacement Level of Natural Sand,” Proceeding of the Korea Concrete Institute, Vol.26, No.2, 2014, pp.669-670.Google Search
8 
8.Sim, J. I., and Yang, K. H., “Air Content, Workability and Bleeding Characteristics of Fresh Lightweight Aggregate Concrete,” Journal of the Korea Concrete Institute, Vol.22, No.4, 2010, pp.559-566.DOI
9 
9.Sim, J. I., and Yang, K. H., “Mechanical Properties of Lightweight Aggregate Concrete according to the Substitution Rate of Natural Sand and Maximum Aggregate Size,” Journal of the Korea Concrete Institute, Vol.23, No.5, 2011, pp.551-558.DOI
10 
10.Chen, H. J., Yen, T., and Lai, T. P., “A New Proportion Method of Light-Weight Aggregate Concrete based on Dividing Strength,” Holand et al.(Eds), International Symposium for Structural Lightweight Aggregate Concrete, Vol.20, No.4, 1995, pp.463-471.Google Search
11 
11.Bogas, J. A., and Gomes, A., “A Simple Mix Design Method for Structural Lightweight Aggregate,” Materials and Structures, Vol.46, 2013, pp.1919-1932.DOI
12 
12.ISO 13315-2, Environmental Management for Concrete and Concrete Structures-Part 2: System Boundary and Inventory Data, International Organization for Standardization, Geneva, Switzerland, 2014, p.28.Google Search
13 
13.Jung, Y. B., and Yang, K. H., “Mixture- Proportioning Model for Low-CO2 Concrete Considering the Type and Addition Level of Supplementary Cementitious Materials,” Journal of the Korea Concrete Institute, Vol.27, No.4, 2015, pp.427-434.DOI
14 
14.http://www.edp.or.kr/ Google Search
15 
15.Tae, S. H., Development of Mix Design Technique of Concrete for Reduction of CO2 Emission, Technical Report, School of Architecture & Architectural Engineering, Hanyang University, 2014, p.87Google Search
16 
16.http://www.ecoinvent.com/ Google Search
17 
17.Yang, K. H., Jung, Y. B., Cho, M. S., and Tae, S. H., “Effect of Supplementary Cementitious Materials on Reduction of CO2 Emissions from Concrete,” Journal of Cleaner Production, Vol.103, 2015, pp.774-783.DOI
18 
18.Yang, K. H., Kim, G. H., and Choi, Y. H., “An Initial Trial Mixture Proportioning Procedure for Structural Lightweight Aggregate Concrete,” Construction and Building Materials, Vol.55, 2014, pp.431-439.DOI
19 
19.Yang, K. H., Modeling of the Mechanical Properties of Structural Lightweight Concrete based on Size Effects, Technical Report, Department of Plant․Architectural Engineering Kyonggi University,  2011, p.89.Google Search